Description
Timing Belt Pulley that has a wide range of applications is specialized pulleys that possess either teeth or pockets outside the diameter of the body of the pulley. These teeth properly fit into the holes of the metal belts. These belt pulleys are mainly made of light raw material such as cast iron, aluminum, etc.
Types of Timing Belt Pulley
Different types of timing belt pulleys are available such as pilot bore type, final bore type, taper lock bush type, QD bush type.
Features of Timing Belt Pulley
Our timing belt pulley is made with teeth or pockets and these are used only for timing. Hence these pulleys are not used for power transmission. These are made of cast iron, aluminum and primarily used in the textile and automobile industries. So, the features of timing belt pulleys can be mentioned below.
The existence of belt teeth and pulley tooth helps to eliminate slippage and these also use to limit speed variation.
The belt teeth are engaged with the pulley axial groove. This is done extremely smoothly and it helps to lower the friction to the minimum. This also helps to reduce noise or wear.
These pulleys are available with high mechanical efficiencies and these are available with no friction and no elongation. This helps to lower the bearing load and thus helps to enhance the life of the bearing.
The range of the drive lies between 10 RPM to 10000 RPM between both the spindles.
There is no need for a lubrication system due to the absence of contact between the metal. Hence there is no need for any type of oil-related device.
